Setcrete Universal Floor Levelling Compound - 20kg

Setcrete Universal Floor Levelling Compound is an easy to use floor levelling compound, that is suitable for use over a wide range of absorbent sub floors including sand/cement screed and concrete.

It is designed for use prior to the installation of a floor covering, in areas of light foot traffic.

Features & benefits

• An easy to use floor levelling compound – just add water in correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes
• The product can be applied in one application to depths between 3mm and 6mm
• Setcrete Universal takes approximately 24 hours at to fully dry, so that floor coverings can be laid on top. However, after 3 hours it is hard enough for you to walk on
• Setcrete Universal is suitable to use over a wide range of absorbent sub floors, which should first be coated with Setcrete Acrylic Primer diluted in a ratio of 1 part primer to 4 parts water
• For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete Acrylic Primer
• The working time for use is approximately 15 – 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature and humidity. Do not mix more than one bag at a time
• Setcrete Universal is not suitable for use when bonding solid wood flooring. All other Setcrete floor levelling compounds are suitable for installation of this type of flooring
• For further information and technical advice regarding the use of Setcrete Universal, please email the Technical Services Department – contact@setcrete.co.uk
• Always read the instructions